Projector image brightness and color correction


The steps in this article will help you match the color and brightness of the projected images as close as possible.

Note: If your projector model is NPSi-1, ensure that its firmware is version C07 or higher:
  1. Open the projector menu
  2. Navigate to the Options tab
  3. Select Information.

The current software version will be displayed. If your firmware is older than C07, contact your reseller to find out about an update.

Color corrections

Follow these steps to color match your projectors:
Fix ToolSteps Example


Projector settings

Inside the projector menu
  1. Download and open the color correction bar .png here
  2. Open the .png across both projected images
  3. Use the projector Picture settings to make adjustments
Color Mode • Color Temp • Hue • Saturation
  1. Open a white notepad across both projectors
  2. Use the projector Picture settings to make adjustments to match the white
Gamma • Color Temp • Wall Color

See the projector user manual for further details.



Color management

Built into Microsoft® Windows®  

  1. On your computer, go to Control panel > Color management
  2. Open the Advanced tab
  3. Select Calibrate display
  4. Follow the steps in the on-screen wizard


Video card settings

Find the color and brightness options inside the manufacturer's
video card settings.

Configure each output individually.
D Change room lighting If the brightness can't be improved enough with steps A to C,
consider removing lights from the room.

Last updated: January 5, 2018

Feedback and Knowledge Base